Remote Control Buttons; Power-Button - DREAM MULTIMEDIA Dreambox DM 600 PVR C Bedienungsanleitung

U s e r M a n u a l D r e a m b o x D M 6 0 0 PVR
13.

Remote Control Buttons

MENU-Button
If you are in TV- or RADIO-Mode, pressing this button will bring up the OSD main menu. The
OSD main menu has the following options:
- (1) TV Mode
- (2) Radio Mode
- (3) File Mode
- (4) Information
- (5) Shutdown
- (6) Setup
- (7) Games
- (8) Timer
You can switch to the needed option by pressing the Navigation-Buttons left or right. Also
see: Important notes about operation.
The numbers in front of each option can be used to directly access the needed function by
pressing the according number on the Numeric Keypad of your Remote control.
If you are in the service list, pressing the MENU-Button brings up the service menu. The
shown options may vary depending on the service list you selected.
SHIFT / SETUP-Button
The SHIFT/ SETUP-Button is used to preprogram the remote control to operate a TV.
See chapter TV-Mode setup.

Power-Button

The Power-Button switches your Dreambox on and off.
See chapter Turning your Dreambox on and off.
DREAM-Mode-Button
The DREAM-Mode-Button switches your remote control into Dreambox control mode. It will
shortly light up once your press the button.
TV-Mode-Button
The TV-Mode-Button switches your remote control into TV control mode to control your
preprogrammed TV. It will shortly light up once your press the button.
See chapter TV-Mode setup.
- 13 -
english