Motorola T805 Bedienungsanleitung Seite 12

 On your phone, launch the MOTONAV application.
Follow the applicable steps below to launch MOTONAV on your phone:
- On Motorola phones, press (Main Menu) > Games & Applications.
- On Nokia phones, try Menu > Applications, Menu > My Own, or take a look into one of the subfolders.
- On Sony Ericsson phones, go to location specified during installation.
3 Configure the MOTONAV application:
- If a MOTONAV Setup Wizard screen is displayed, go to step 4 and follow prompts to launch and execute
the MOTONAV Setup Wizard.
- If a MOTONAV Setup Wizard screen is not displayed, skip to step 5 to manually configure settings.
4 Follow prompts to launch and perform the MOTONAV Setup Wizard. During the setup wizard. you will:
Note: Ensure the Bluetooth GPS receiver is turned on while performing these steps.
- Enter/save MOTONAV user name and password (as defined in step 4 of "Install MOTONAV").
- Test/verify connectivity with the MOTONAV system.
- Pair/connect with the GPS receiver. (If prompted for Bluetooth passcode, enter 0000).
- Download and install voice announcements for guidance instructions.
- Set preferred measurement units.
A completion message is displayed when setup wizard is complete. Click Cancel to display MOTONAV main
screen (or proceed to display MOTONAV tips).
Follow these steps to configure MOTONAV:
5
Note: These steps need to be performed only if the MOTONAV Setup Wizard was not displayed and
completed (in step 4).
Note: Ensure the Bluetooth GPS receiver is turned on while performing these steps.
a Select Options > Settings > Login to enter user name and password (as specified in step 4 of "Install
MOTONAV").
b Select Options > Settings > GPS to pair/connect with GPS receiver.
c Select Options > Settings > Voice announcements > Available downloads > Standard to download and
install voice announcements for guidance instructions.
English
9