Specifications; General Specifications - Hioki CM3289 Bedienungsanleitung

Specifications

Accuracy
We define measurement tolerances in terms of rdg. (reading)
and dgt. (digit) values, with the following meanings:
rdg.
(reading or
displayed value)
dgt.
(resolution)

General Specifications

Operating
environment
Operating temperature and humidity
Temperature
Humidity
(no
condensation)
The value currently being measured and
indicated on the measuring instrument.
The smallest displayable unit on a digital
measuring instrument, i.e., the input
value that causes the digital display to
show a "1" as the least-significant digit.
Indoors, pollution degree 2, altitude up
to 2000 m (6562 ft.)
−25°C to 65°C (−13.0°F to 149.0°F)
(From the 40 M
Less than 40°C (104.0°F): 80% RH or less
At least 40°C (104.0°F) but less than 45°C
(113.0°F): 60% RH or less
At least 45°C (113.0°F) but less than 50°C
(122.0°F): 50% RH or less
At least 50°C (122.0°F) but less than 55°C
(131.0°F): 40% RH or less
At least 55°C (131.0°F) but less than 60°C
(140.0°F): 30% RH or less
At least 60°C (140.0°F) but less than 65°C
(149.0°F): 25% RH or less
Specifications
Ω
range: up to 40°C)
EN-13