gns 2000 Anleitung Seite 5

· Ensure that your GNS 2000 is firmly fixed in your car to
avoid damage.
Package contents
· GNS 2000 GPS/GLONASS BT Receiver
· Cigarette-lighter charger device and charger cable
· Suction mount
· This instruction booklet
Should anything be missing, please contact your dealer.
Operating buttons and LEDs
The GNS 2000 has a physical on-/off-switch.
To switch on your GNS 2000, move the switch from left to
the right and from right to the left to switch off.
Logger Function
The GNS 2000 provides a logger with a 15 hour internal
memory. After 15 hours of independent position data
collection the data is overwritten automatically.
To turn on the logger function, please use the switch as
follows: Switch the device on and then (within one second)
switch it off and on again. The green GPS LED will flash
3 times to confirm that the logger function is activated.
During operation the activity of the logger is indicated by
the green LED going out briefly every second while a GPS
fix is available. To deactivate the logger function, switch off
the device as usual.
Using the GNS tool GNS2000Track the logged data can be
transferred to your computer and saved in NMEA- or KML-
(Google™ Earth) format. GNS2000Track can be down-
loaded from our webpage, please pay attention to the listed
compatibility information.