THIEYE Safeel Zero+ Anleitung Seite 14

③ Date / Time
This setting is to set correct date and time on the dash cam for video recording and camera
shooting.
· Press Up / Down button in System Setting to enter Date / Time setting page, press OK button to
set Date / Time.
· Set date firstly by pressing Up / Down button. Press OK button after done and move the cursor
to the next spot on the right. Adjust date and hour/minute/second from top to bottom.
· After finishing setting, short press Power / Mode button comes back to the System Setting
Menus.
④ Upgrade Firmware
· Please download the latest firmware from ThiEYE website (thieye.com/support.html) and
upgrade the camera according to the instruction in the file.
· Two ways to upgrade the firmware: Advanced Update (by PC) and Quick Update(by the
camera). We suggest Advanced Update, which is much more convenient.
· Please keep upgrading the firmware in time to maintain the best user experience.
· Do not disconnect your device from power while it is being updated. This will result in damage to
the dash cam.
12 EN