ASROCK M3A-GLAN Bedienungsanleitung Seite 19

d
tion
12 24
ion
1 13
2.7 2.7 Driver Installation Guide Driver Installation Guide
2.7 2.7 2.7 Driver Installation Guide Driver Installation Guide Driver Installation Guide
To install the drivers to your system, please insert the support CD to your optical
drive first. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom
side to install those required drivers. Therefore, the drivers you install can work
properly.
2.8 2.8 2.8 2.8 2.8 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista Vista Vista 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions 64-bit With RAID Functions
TM TM TM TM TM
®
If you want to install Windows XP / XP 64-bit / Vista
/ SATAII HDDs with RAID functions, please refer to the document at the following path
in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.9 2.9 2.9 2.9 2.9 Installing Windows Installing Windows Installing Windows Installing Windows Installing Windows
Vista Vista Vista Vista Vista 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions 64-bit Without RAID Functions
TM TM TM TM TM
If you want to install Windows
Windows ® Vista TM 64-bit OS on your SATA / SATAII HDDs without RAID functions,
please follow below procedures according to the OS you install.
2.9.1 Installing Windows 2.9.1 Installing Windows 2.9.1 Installing Windows
2.9.1 Installing Windows 2.9.1 Installing Windows
Functions Functions Functions
Functions Functions
If you want to install Windows ®
HDDs without RAID functions, please follow below steps.
NOTE1. If you install single or multiple SATA / SATAII HDDs on this motherboard and plan
to install Windows ® XP / XP 64-bit on SATA / SATAII HDDs, it is still suggested to
use RAID mode even you don't plan to use RAID functions. Please refer to "User
Manual" in the support CD for details.
NOTE2. AHCI mode is only recommended for Windows
you install Windows ® XP / XP 64-bit, it is not suggested to use AHCI mode.
Using SATA / SATAII HDDs without NCQ and Hot Plug functions
STEP 1: Set up BIOS.
A. Enter BIOS SETUP UTILITY
B. Set the "SATA Operation Mode" option to [IDE].
STEP 2: Install Windows ® XP / Windows
ASRock
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
® ® ® ® ®
TM TM
/ Vista 64-bit on your SATA
XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista XP / XP 64-bit / Vista
® ® ® ® ®
® XP, Windows ® XP 64-bit, Windows
XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
® ® ® ® ® XP / XP 64-bit Without RAID XP / XP 64-bit Without RAID
XP or Windows ® XP 64-bit on your SATA / SATAII
® Vista TM / Vista
Advanced screen IDE Configuration.
® XP 64-bit OS on your system.
M3A-GLAN Motherboard
/ / / / /
TM TM TM TM TM
/ / / / /
TM TM TM TM TM
® Vista TM or
TM 64-bit users. If
1 9 1 9 1 9 1 9 1 9