Video Menu; Photo Menu - GUARDO DDC-200 Handbuch

For example: to set date and time, please follow these steps:
1.
Make sure the battery is charged.
2. Turn the DASHCAM ON or use it with the car charger in the car).
3.
Stop the recording if needed.
4. Press .
5.
Press again.
6. Use the
7.
Press the
8.
You can now use the
by pressing the
Only works when no recording has been started.
#

VIDEO MENU

Resolution
Video resolution
Dual camera
Loop Recording
Cycle recording: Saving time of each section on SD card
HDR
Exposure
Luminance adjustment
Motion Detection
Automatic recording when movement is detected (only for front cam)
Record audio
Sound recording
Date Stamp
Date indication while recording
G-sensor
Adjust gravity acceleration for activation of the G-sensor
Park mode
Headlight warning
* Recommended setting

PHOTO MENU

Capture mode
Resolution
Quality
Sharpness
HDR
White Balance
Colour
ISO
button to go to DATE & TIME.
button.
& buttons to change the date and time and confirm each setting
button. You can exit this menu by pressing the
Single Shot, 2s, 5s, 10s delay
12MP 4032x3024 / 10MP 3648 x2736 / 8MP 3264 x 2448 / 5MP
2592x1944 / 3MP 2048x1536/ 2MP HD 1920x1080 / VGA 640x
480 / 1.3MP 1280x960
Fine / Normal / Economy
Strong / Normal / Soft
Off / On*
Auto* / Daylight / Cloudy / Tungsten / Fluorescent
Normal / Black & white / Sepia
Auto* / 100 / 200 / 400
FHD 1080P 1920x1080
720P 848x480 / VGA
Off / On
Off / 1 Min. * / 5 Min. / 10 Min.
Off / On*
+3.0 / +2.0 / +1.0 / +0.0 / -1.0
/ -2.0 / -3.0
Off* / On
Off / On
Off / On
Off / Low* / Medium / High
Off / On
Off/ On
-9-
button.