LOGSTOR FlexPipe PexFlextra Handbuch Seite 87

Materialien
Isolierverpackung:
Schaumpackung:
Sicherheits­ Ein detailliertes Sicherheitsdatenblatt für
datenblatt Schaumpackung ist auf unserer Webseite
zugänglich.
Das Sicherheitsdatenblatt umfasst 16 Punkte
mit Auskünften.
LOGSTOR A/S · www.logstor.com
Produkte - Schaumpackungen
Polystyrolschaum (EPS)
Mehrschichtiger Kunststoffbeutel mit diffusionsdichter
Aluminiumfolie für Komponenten A und B.
Komponente A: Isocyanat, MDI
Komponente B: Polyol und Cyclopentan
3.8.3
Beschreibung
SAFETY DATA SHEET
Product name FOAM PACK Version no.: 1 SAFETY DATA SHEET Page 1/5
Created: 10-01-2008 Date of revision: 10-01-2008 Date of printing: 10-01-2008
Product name FOAM PACK Version no.: 1 Page 2/5
SAFETY DATA SHEET
Created: 10-01-2008 Date of revision: 10-01-2008 Date of printing: 10-01-2008
Product name FOAM PACK Version no.: 1 Page 3/5
SAFETY DATA SHEET
FOAM PACK Created: 10-01-2008 Date of revision: 10-01-2008 Date of printing: 10-01-2008 en
Product name FOAM PACK Version no.: 1 SAFETY DATA SHEET Page 4/5
9. Special protective equipment:
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING: Created: 10-01-2008 Date of revision: 10-01-2008 PHYSICAL AND CHEMICAL PROPERTIES: Date of printing: 10-01-2008
Wear self-contained breathing apparatus and full protective gear when extinguishing fire. Product name FOAM PACK Version no.: 1 Isocyanate (component A) Polyol (component B) Page 5/5
Product Name: FOAM PACK Accumulation: Created: 10-01-2008 Date of revision: 10-01-2008 Date of printing: 10-01-2008
General information: Form: Liquid Liquid
If it is without risk containers should be removed from the area where there is a risk of fire. Not Known. Emergency telephone number :
Supplier: Uses and Restrictions:
Colour: Brown Clear, yellowing
LOGSTOR A/S Dial 999 in case of a emergency, or
6. Individuals wit more susceptibility to dermatitis should not be selected to work isocyanates. General information:
ACCIDENTAL RELEASE MEASURES: Prevent material from entering drains, streams, lakes etc. Odour: Weak Weak
Danmarksvej 11 Not to be handled by persons under the age of 18 years. NHS Direct for advice 0845 4647 (GB).
Personal precautions: Density: 1,23 g/cm³ Both services are available 24 hours. 1,04 g/cm³
DK-9670 Loegstoer Special Education:
13. Remove all ignition sources and ensure sufficient ventilation. Avoid inhalation of vapours/aerosols and contact with skin and DISPOSAL CONSIDERATIONS:
Telephone no.: Explosion limits: - 1,1-8,7 % (Cyclo pentane)
eyes. Unauthorized persons are forbidden to enter. Regarding personal protection - see section 8. The user of the product must be thoroughly instructed in working with the product, the dangerous properties of the product and the 0045 99 66 10 00
Responsible for the Safty Data Sheet necessary safety measurements. Disposal considerations: Boiling point: - > 48°C (Cyclo pentane)
Environmental precautions:
Delivered to disposable centre according to the local regulations.
E- mail: Flash point: tit@logstor.com > 200°C 8°C
16. Prevent material from entering drains, streams, lakes etc.
OTHER INFORMATION: Waste code: Melting point 07 02 13 waste plastic < 0°C <-10° C
Methods for cleaning up:
08 05 01 waste isocyanates
Uses: Absorb spill with non flammable, absorbing material, e.g. sand, soil, vermiculit, and place in suitable disposable container Ignition temperature: > 400°C 380° C (Cyclo pentane)
R phrases:
(section 13). The container should not be closed caused by the developing of CO2 from the waste. The container should be
Insulation for district heating joints R11 General information: Vapour pressure Highly flammable. 1 hPa (20°C) 345 hPa (20°C) (Cyclo pentane)
under observation. Keep it in the open container outside. The total time of reaction: 7-14 days. Dispose according to section
R20 EAK 07 02 13 should be use when it is in a mixture or the waste from tiding up in section 6. Harmful by inhalation.
2. HAZARDS IDENTIFICATION: 13. R52 Viscosity: Harmful to aquatic organisms. 200 mPa (20°C) 690 mPa (23°C)
14. R53 TRANSPORT INFORMATION: May cause long-term adverse effects in the aquatic environment.
Water solubility: No No
7. Main Toxicological and Ecological hazards: HANDLING AND STORAGE: R36/37/38 Irritating to eyes, respiratory system and skin.
Isocyanate (component A): Harmful by inhalation. Irritating to eyes, respiratory system and skin. May cause sensitisation by ADR/RID R42/43 May cause sensitisation by inhalation and skin contact. UN no. 1866
Handling:
inhalation and skin contact. 10. Class: 3
STABILITY AND REACTIVITY:
Polyol (component B): Highly flammable. Avoid inhalation of and contact with product. Eating, drinking, smoking or storage of food, drinks and tobacco must not take Final remarks:
Packaging group: II
place where there is a risk of contamination of the product. Wash hands before any breaks and after working hours. Ensure This safety data sheet is compiled on the basis of information from the supplier and in accordance with EU legislation. The users
Stability: Hazard Identification: 33
adequate ventilation. Local mechanical exhaustion could be necessary. Take measures to prevent static electricity. Ensure working conditions is outside our knowledge and control, we draw to your attention that it's always the users responsibility to take the
3. COMPOSITION/INFORMATION ON INGREDIENTS: Isocyanate (component A): Polymerisation occurs by 200°C. The polymerisation will develop CO2.
access in the working area to "rinse the eye" facility. Ensure access to ample water, shower facility and changing-room. necessary precautions and follow the given legislation. Proper Shipping Name: RESIN SOLUTION
Polyol (component B): The product is s table if it is handled and stored according to section 7.
Isocyanate (component A) CAS no: 9016-87- 9 Personal protective equipment: Refer to section 8. IMDG-CODE UN no. 1866
Polyol (Component B) contains CAS no: 287-92-3 References:
Storage: Conditions to avoid: Class: 3
CHIP3: Chemicals (Hazard Information and Packaging for Supply), Regulations 2002 (SI 2002/1689) and accompanying
Temperature above 40°C. Packaging group: II
Contains: Store securely, away from children, away from food, animal foodstuffs, medicaments or the like. Stored in temperatures documentation. EH40/2005 Occupational Exposure Limits. COSHH : The Control of Substances Hazardous to Health Regulations 2992
CAS number: between 10 and 40°C. Keep the product away from ignition sources, oxidizing agents and strong acidic and basic substances. and subsequent amendments. EC Regulation no. 1907/2006. REACH. EC-no.: %: Chemical Name: EmS: Classification: F-E, S-E Note:
Substances to avoid:
Follow the HSG51 "The storage of flammable liquids in containers." HSE INDG388 10/03 C650 (Working with 2-pack isocyanate paints). Proper Shipping Name: RESIN SOLUTION
9016-87-9 Oxidizing agents and acids. Bases. Alcohols. Amines. Isocyanate (component A): Isocyanates reacts strongly with water under a 100% diphenylmethane-4,4'-di- Xn, Xi R20, R36/37/38,
IATA heating development. isocyanate, isomers and UN no. 1866
Drawn up by: pbb trotters aps R42/43
Class: 3
QA ah 01-2008 homologue
8. EXPOSURE CONTROLS/PERSONAL PROTECTION: Hazardous Decomposition Products:
Updated by: pbb Packaging group: II
287-92-3 When heated to high temperatures, or in case of fire, the product can liberate toxic gases/vapours of: Carbon oxides, nitrogen oxides, 206-016-6 < 10% cyclo pentane F R11, R52, R53
Engineering Control Measures: Proper Shipping Name:
isocyanate, compound of cyanides. RESIN SOLUTION
4. FIRST AID MEASURES: All work must be planned with a view to limit the breathing of fumes and the exposure to the skin. Ensure adequate ventilation.
There must be access to ample supplies of water and eye wash bottles. General information: Hardening time for Isocyanates.
General information:
This Transport information is only relevant for Polyol (component B). Isocyanate (component A) is not comprised by transport 5 minutes at 20°C
Respiratory Protection:
In case of doubt or if the symptoms are continuous, seek medical advice. regulations of dangerous goods.
In poor ventilated areas use fresh air equipment.
TOXICOLOGICAL INFORMATION:
Inhalation: 11.
15. Hand Protection: REGULATORY INFORMATION:
Move the injured person into fresh air, if symptoms are continuously seek medical aid. If the patient is conscious examine if
Inhalation:
patient is breathing. If the unconscious person is breathing, lay person in recovery position and keep warm with blankets or the Use protective gloves of nitril rubber, butyl or any suitable material. Break through time > 480 min. Follow the glove
Contains: Isocyanate (component A): May irritate respiratory tract and may cause coughing, asthmatic breathing and difficulty in breathing. Isocyanate (component A): Diphenylmethane-4,4´-diisocyanate, isomers and
manufacturer's recommendations on use and replacement.
like. If breathing has stopped, apply artificial respiration. Seek medical attention. Polyol (component B): Vapours may cause bluntness and dizziness. homologue
Eye protection: Polyol (component B): Polyol with contains of cyclopentane
Contact with eyes:
Contact with skin:
Open your eye wide. Make sure to remove any contact lenses. Immediately flush eyes with water for at least 10 minutes. Seek Use protective goggles or face shield.
Labelling: Irritating to skin. Isocyanat (component A): Diphenylmethane-4,4´-diisocyanate, isomers and homologue
medical attention.
Skin Protection:
Contact with skin: Contact with eyes: Xn R20 Harmful by inhalation.
Use special working clothes.
Remove contaminated clothes immediately, and wash skin thoroughly with soap and water. Always end cleansing with Irritating to eyes. R36/37/38 Irritating to eyes, respiratory system and skin.
General information: R42/43 May cause sensitisation by inhalation and skin contact.
applying moisturising cream to degreased skin. Obtain medical attention if irritation continues.
The employer has a duty to ensure that pregnant women are not exposed to any influences, which may be a risqué to the Ingestion: S23 Do not breathe vapour/spray.
Ingestion: Ingestion may cause nausea and queasy.
unborn child.
Rinse mouth with water. Drink afterwards plenty of water. Seek medical attention. S45 In case of accident or if you feel unwell, seek medical advice immediately (show
Occupational Exposure Limits: Chronic effects: the label where possible).
Burns:
Isocyanate (component A): May cause sensitisation by inhalation and skin contact. Harmful
Polyol (component B): Flush with plenty of water until pain ceases. Whilst flushing with water, remove all loose clothing from The general exposure limits of all isocyanates are 0,02 mg/m³. EH40/2005 Workplace exposure limits.
Polyol (component B) Inhalation of vapours may cause drowsiness, dizziness and can cause damage to the central nervous system by S36/37 Wear suitable protective clothing and gloves.
area of burns. If medical treatment is necessary, continue flushing until medical trained staff takes over treatment. prolounged exposure.
F Polyol (component B):
5. FIRE- FIGHTING MEASURES: 12. ECOLOGICAL INFORMATION: R11 Highly flammable.
Suitable extinguishing media:
Eco toxicity: S9 Keep container in a well-ventilated place.
Fire is extinguished with water fog, foam, powder or carbon dioxide.
None known. S16 Keep away from sources of ignition - No smoking.
Extinguishing media that must not be used: S33 Take precautionary measures against static discharges.
Mobility:
Do not use full jet of water. The fire will spread.
Isocyanate (componenet A), Polyol (componenet B) and the mixture are not soluble in water. Therefore there is no mobility in water.
Special hazards:
Highly flammable
If heated or in case of fire toxic fumes are formed. Degradability:
Isocyanate (component A): Bio-degradation: Difficult.
Special labelling: Polyol (component B): Bio-degradation: Difficult.
Contains isocyanates.
FlexPipe Handbuch · 2018.10