Exibel NE-6205 Bedienungsanleitung Seite 5

Operating instructions
Backlight
When the radio is turned on, the backlight comes on at full brightness and then fades
slightly. Similarly, when any button is pressed, the backlight comes on at full brightness
and then fades slightly.
Handy hint
Fully extend the telescopic aerial to get the best possible reception.
Turning the radio on
1. Make sure the power switch is in the OFF position.
2. Plug the DC connector on the mains lead into the power socket
on the back of the radio.
3. Plug the mains lead into a wall socket.
4. Set the on/off switch to ON.
Listening to the DAB radio
DAB mode
1. When the radio is turned on it automatically enters DAB mode and performs
an autoscan. During the scanning process, the word "Scanning" and the number
of stations found will appear on the display.
2. When the scanning process has been performed, the radio selects the lowest
frequency station. Use the [ ▼ ] and [ ▲ ] buttons to browse the stations and
confirm your selection by pressing [ SELECT ].
Note: If no radio station is found, the radio automatically enters menumode from
where you can choose to search for a station manually or via the autoscan feature.
Use the [ ▼ ] and [ ▲ ] buttons to choose a method and confirm your selection by
pressing [ SELECT ].
DAB autoscan
Autoscan searches for stations on all of the DAB Band III channels.
When the scanning process has been performed, the radio selects
the lowest frequency station.
1. To activate the autoscan function, press [ MENU ] and use the [ ▼ ] and [ ▲ ]
buttons to select Autoscan and then press [ SELECT ] to confirm. The display
will now show "Scanning".
2. When stations are found, they are saved automatically. To listen to a station,
press [ ▼ ] and [ ▲ ] and then confirm using [ SELECT ].
5