Mitsubishi Electric DX-TL2500E Kurzanleitung Seite 22

Communications by Web Browser (continued)
3-1. (If you make an error in entering the userID or password
• • • )
• The "[Rejection]" screen will appear.
3-2. Select "[Back to Authentication]" and either left-click or
press ENTER.
• The "[Authentication]" screen will appear.
3-3. Follow the steps in step 2-1 and enter the correct "userID"
and "password".
4-1. (If you do not log in • • • )
Select "If you don't want to log in, click here to exit." and left-
click.
4-2. The message "SessionID removed in recorder & browser.
Please shut this Web Browser down to clear of your browser's
cache." will display. Close the Web Browser.
5-1. (To change password • • • )
The password can be changed in the "[Authentication]" screen
only by the user who has the authorization to change a
password. Follow the instructions in the menu and enter the
present "userID" and "password".
5-2. Enter the new password in "new password:" and again in
"retype new password:".
The number of characters that can be used in reg-
istering a password is 16. Both alphabet letters and
numbers can be used with a distinction made between
upper and lower case. You cannot use spaces.
5-3. To change into a new password, select "change" and left-
click or press ENTER. To stop the change, select "clear", and
left-click or press ENTER.
Welcome
This is the screen for selecting, from "Menu", "live monitor"
with which live pictures will be retrieved and displayed,
"playback" with which pictures that have already been re-
corded will be retrieved and displayed, "user maintenance",
with which the settings for user authorization will be
configured, "log out" for ending a job, or "change log in
user" for making a change in the logged-in user.
Depending on what the user's authorization is,
there are certain menus that cannot be selected. If
a request is made for a live picture by communica-
tion during the playback of a recorder, the recorder
playback will be stopped.
The user's sessionID (connection data) will be
lost in 5 minutes from the final operation that includes
image retrievals.
If no operations are made within that 5 minutes,
no other operations can be made after that so close
the browser and then log in again.
If the recorder's MAIN switch is "OFF", live and
recorded images cannot be retrieved.
1. Select the desired "Menu" and left-click.
•••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••
22
• Live monitor
Retrieves live images and displays the images on the PC
screen.
1. Select "live monitor" and left-click.
• The "live monitor" screen will display.
When image acquisition is tried for the first time
with the Web browser of a personal computer, a
message as shown below will be displayed. Please
click "Yes".
When a live picture is acquired from the recorder
and the <OUTPUT B ON/OFF> setting is "ON", the
updating speed for the Live monitor screen de-
creases. It is recommended to set the <OUTPUT B
ON/OFF> setting to "OFF".