Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.4. 6-pole connector for lambda sensor
Connect to wide-band lambda sensor.
2.5. 4-pole CAN connector
For connection to CAN display, ECU CAN input, etc. Pin functions are as
following:
Male CAN connector front:
The CAN connection hub included in the package can be used to connect
the KMS UEGO CAN controller to the CAN bus. For every CAN device that's
connected to the CAN bus, a CAN connection hub will be needed.
__________________________________________________________
KMS UEGO CAN controller
Part nr: 01-01-01-0010
Pin nr
Colour
1
Red
2
Black
3
White
4
Green
kms.vankronenburg.nl
Function
12V supply
Ground
Can High (+)
Can Low (-)
Female CAN connector front:
EN—NL—DE
EN
7
Werbung
