Werbung
Step 3: Assemble the arms to the Power Management Board.
Attach the arm to the Power Management Board, see Figures 6 and 7. Use M2 5X6 screws
a total of 2 in each arm. Insert the screws from the bottom of the plate, see Figure 8. Make
sure the ESC cables run through the middle of the arm, see Figure 9.
MYBOTSHOP uG
Auf dem Driesch 60
DE-50129 Bergheim
GF: Daniel Kottlarz
Figure 4
Figure 5
www.mybotshop.de
info@mybotshop.de
+49 (0) 2271 485 72 33
AG Köln: HRB 95899
SteuerNr: 203/5769/1147
USt-IdNr.: DE321168831
WEEE-Reg.-Nr. DE 65961298
Werbung
