Insert Battery; How To Conduct A Session; How To Use Your Slim Tens - IBP Slim Tens Gebrauchsanweisung

5.2 Insert Battery

If the battery has not yet been inserted:
1. Unwrap battery.
2. Open battery compartment:
Push down the cover using your thumb and
slide back.
3. Insert battery.
The "+" symbol on the battery
must face up.
4. Close battery compartment.
If the battery has already been inserted:
1. Open battery compartment:
Push down the cover using your thumb and
slide back.
2. Remove battery.
3. Remove safety strip.
4. Reinsert battery.
The "+" symbol on the battery
must face up!
5. Close battery compartment.
32

6. How to conduct a session

6.1 How to use your Slim Tens

1. Remove the protective foil from the patch.
2. Apply the Slim Tens to one of the stimulation
points.
Apply the Slim Tens only to clean, dry,
healthy skin that has not been treated with
cosmetics and creams.
The Slim Tens must adhere firmly to the
skin. Replace the patch when its adhesive-
ness has subsided.
3. Turn on the Slim Tens:
Push the ON+ button once.
The illuminated display blinks red.
ON+ button
Illuminated display
OFF– button
4. Adjust the stimulation intensity to a
high level as described in Section 6.2
„Stimulation Points, Duration and Frequency
of Application": The stimulation should not
create an unpleasant feeling or pain!
The intensity of the stimulation is increased
with the ON+ button and decreased with
the OFF– button. You may set the intensity
of the stimulation to 10 different levels.
33