Herunterladen Inhalt Inhalt Diese Seite drucken

How To Conduct A Session; How To Use Your Skeen Patch - IBP SKEEN Patch Gebrauchsanweisung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

6. How to conduct a session

6.1 How to use your SKEEN Patch

During your applications, maintain a
minimum distance of 1 m to micro-
wave devices and short-wave devices.
Electromagnetic interaction may impair the
function of the SKEEN Patch.
1. Remove the protective foil from the electro-
de patch.
2. Apply the SKEEN Patch to one of the
stimulation points.
Apply the SKEEN Patch only to clean, dry,
healthy skin that has not been treated with
cosmetics and creams.
The SKEEN Patch must adhere firmly to
the skin. Replace the patch when its adhe-
siveness has subsided.
3. Turn on the SKEEN Patch:
Push the ON+ button once.
The illuminated display blinks red.
ON+ button
Illuminated display
OFF– button
4. Adjust the stimulation intensity to a high le-
vel as described in Section 6.2 „Stimulation
Points, Duration and Frequency of
34
Application": The stimulation should not
create an unpleasant feeling or pain!
The intensity of the stimulation is increa-
sed with the ON+ button and decreased
with the OFF– button. You may set the
intensity of the stimulation to 10 different
levels.
Repeatedly press the ON+ button
until the specified stimulation intensity
has been reached.
The brightness of the illuminated
display increases with the amount of
stimulation intensity.
Repeatedly press the OFF– button if
you would like to lower the stimulation
intensity.
The brightness of the illuminated dis-
play decreases with the decreasing
stimulation intensity.
Your SKEEN Patch automatically turns off
after 15 minutes.
Turn the SKEEN Patch back on if you wish
to continue the application.
Lower the stimulation intensity or turn
off the SKEEN Patch if the effect should
become unpleasant.
5. Turn off the SKEEN Patch after the appli-
cation duration recommended in Section
6.2 „Stimulation Points, Duration and
Frequency of Application" has passed:
Press the OFF– button repeatedly until
the illuminated displays turns off.
Remove the electrode patch from the
skin only in off-mode.
6. Remove the SKEEN Patch from the skin:
Slide a finger underneath the patch and lift
up the patch.
35

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Wl-2303

Inhaltsverzeichnis