Specifications - Microlab FC-362W Handbuch

Remote Control
Infrared lens
VOL+ VOL+
Mute
RESET
VOL- VOL-
Reset
INPUT TREB+ BASS+
Input
TREB- BASS-
Treble
Opening
tab
2.4GHz USB dongle
USB type A interface
Pairing button
(depress tu pair with amplifier)
auto detect the device, "SYNIC wireless audio" and install its driver.
b. Windows® operating system will then change the sound playback properties to the
"SYNIC wireless audio". The blue LEDs will now blink slowly indicating both are paired
EN
and on standby for data transfer.
c. Please start your audio media software and start the playback.
5
d. Next depress the side button of the USB dongle t ill the blue LED blinks quickly, then go
to the back of the main speaker and depress the rear pairing button till the blue LED
blinks quickly to activate the pairing sequence. Once paired, both LEDs will blink slowly
indicating successful connection.
f. The LED will illuminate steadily once music is played and music data being transmitted.
e. The pairing process is carried out once only. Subsequent uses are fully automatic
except for reinstallation of operating system. If t he playback is not started, the pairing
will not work.
Ideal listening position and placement
FL -front left
FR -front right
SW -SUBWOOFER
A -amplifier
Inserting batteries into the remote
1. Locate the side
tab of the remote
control
Volume
2. Press the tab
3. Pull the top apart to
expose the battery compartment
Bass
Note: Prolong un-use period, please remove
batteries to prevent leakage.
Please observe battery
orientation when inserting
Battery compartment
Wireless remote
A
FL FR
SW
Technical Information

Specifications

Amplifier
Output power:
Power distribution:
Harmonic distortion:
Frequency response:
Signal/Noise ratio:
Separation:
Speakers
Tweeter driver type:
Tweeter rated power:
Bass driver type:
Bass rated power:
Frequency range:
Interfaces
Output:
Input:
Wireless:
2.4GHz:
Power
Power supply:
Dimensions
Amplifier:
Subwoofer :
Speakers:
Product net weight:
Frequently Asked Questions (FAQ)
Problem
Solutions
Check if the system is powered on
Power LED won't light up
Check the power plug well connected
Check if the audio source is working well
No Sound
Check if the audio and speaker cables well connected
Check if the volume at right level
Check if the satellite cable well connected, and ensure source
One or more satellite no sound
connection is correctly inserted
Turn off the playback source first, then turn the speaker
Static sound heard when volume
volume knob several times. Playback again and monitor. The
knob is turned
static noise is due to dust, so simply turning the volume will
remove it easily
What are the products supported ?
Any playback devices such as PC, notebook, CD/DVD player,
Media Players with 3.5mm stereo plug
Sound is distorted
Check if the source file is not corrupted, play a different song
and test
Check if the battery in the remote control
Remote control not working
It is magnetically shielded so can be placed near LCD TV
Where to place this speaker
Monitor without any distortion
If the problem still exists, please contact the distributor or ask for professional service
54 Watt RMS
15 Watt x 2 + 24 Watt RMS
< 0.3% 1W 1kHz
35Hz - 20kHz
> 75 dB
> 45 dB
2.5"
15 Watt 2.4 ohm
6.5" with eAirbass
30 Watt 8 ohm
35 Hz - 20 kHz
RCA sockets x 3
3.5mm stereo, and 2RCA sockets
Infrared remote control
USB type A
AC 220V - 240V ~ 50Hz, 200mA
or
AC100V - 120V ~ 60Hz, 460mA
75 (W) x 200 (H) x 200 (D)mm
255 (W) x 255 (H) x 287 (D)mm
96 (W) x 263 (H) x 110 (D)mm
8,80 kg
EN
6