Machine Elements; Intended Use; For Your Safety; Before Putting Into Operation - stayer BH12 Bedienungsanleitung

Machine Elements

1 Torque setting ring
2 Keyless chuck
3 On/Off switch
4 Rotational direction switch
5 Screwdriver bit
6 Battery
7 Battery unlocking button
8 Speed controller
9 Support tip

Intended Use

The machine is intended for the screwing in and
loosening of screws as well as for drilling in wood,
metal, ceramic and plastic.

For Your Safety

Working safely with this machine
is possible only when the
operating and safety information
are read completely and the
instructions contained therein are
strictly followed. In addition, the
general safety notes in the enclosed
booklet must be observed.
Wear safety goggles.
For long hair, wear hair protection. Work only
with closely fitting clothes.
Before each use, check the machine and bat-
tery. If damage is detected, do not use the ma-
chine. Have repairs performed only by a qual-
ified technician. Never open the machine your-
self.
Before any work on the machine itself (e. g.
maintenance, tool change, etc.) as well as
when transporting and storing, always set
the rotational direction switch to the centre
position. Otherwise danger of injury is given
when unintentionally actuating the On/Off
switch.
ENGLISH
11
Convince yourself before using that the battery
is securely seated in the machine.
Use appropriate detectors to determine if
utility lines are hidden in the work area or
call the local utility company for assistance.
Contact with electric lines can lead to fire and
electric shock. Damaging a gas line can lead
to explosion. Penetrating a water line causes
property damage.
Hold the machine tightly: When driving in
screws, high reaction moments can briefly occur.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Never allow children to use the machine.
STAYER is only able to ensure perfect operation
of the machine if the original accessories intended
for it are used.
Battery and Battery Charger
The enclosed operating instructions for the
battery charger must be read carefully!
Do not open the battery, and protect it from impact.
Store in a dry and frost-free place.
Allow a heated battery to cool before charging.
Protect the battery from heat and fire: Danger
of explosion! Do not place the battery on radiators
or expose to strong sun rays for a longer
time; temperatures over 50 °C cause damage.
Do not dispose of the battery in household
waste or discard into fire or water

Before Putting into Operation

Battery Charging
A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approximately 5 charging/discharging
cycles.
11