Functional Characteristics; Before First Use; Operation - Berlinger Haus BH 9050 Gebrauchsanweisung

the appliance and its cord out of reach of children aged less than 8 years. If the
supply cord is damaged, it must be replaced by the manufacturer, its service agent
or similarly qualified persons in order to avoid a hazard.
This appliance is intended to used in household and similar applications such as:
- staff kitchen areas in shops, offices and other working environments
- farm houses;
- by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments.
- if the kettle is overfilled, boiling water may be ejected
The kettle is only to be used with the stand provided
CAUTION: Insure that the kettle is switched off before removing it from its stand.

FUNCTIONAL CHARACTERISTICS

1. Lid
2. On/off switch
3. On/off indicator lamp
4. Base station

BEFORE FIRST USE

1. Remove all packaging material.
2. Clean the kettle by filling with clean water and bringing to the boil
(see"Operation").
Pour away the water then repeat the operation.

OPERATION

1. Wind out the mains cord only as much as necessary. Draw it out through the
opening in the base and connect it to a suitable mains socket. Place the base on a
flat surface.
2. Open the lid by pressing the lid release button and pour in the desired quantity
of water. While doing so, watch the water level mark inside the appliance. Never go
below the minimum (MIN) or above the maximum (MAX) marks.
3. Close the lid by pressing the cover down and ensure that the kettle is switched off
before setting it on the base.Remember to cover the lid tightly,otherwise it will not
cut off the electricity automatically even after the water has boiled.
4. Press the switch down to the position "I". The appliance will begin to operate, and
the indicator light will come on.
1
2 3
4