4.0 LINE – IN GRABBING
Using this USB preamplifier to grab Line in signal from audio device such as CD
4.1 CONNECTION
A. Connect audio cable (R L -> 3.5mm)
to your CD player and USB preamplifier.
B. Take the USB cable (USB A mini -> 5 cable)
and connect your PC or notebook,
with USB preamplifier as the illustration below.
C. Put the switch to "Line on"
5.0 TROUBLE SHOOTING
If the computer cannot catch the USB preamplifier!
A. Please make sure the connection is correct.
B. Please re-connect the USB preamplifier to your USB port, and then check the auto-detection function. (When the
unit is detected, the LED should be lighted on)
The USB port of the PC must have a current of at least 500mA (standard)
Why is the Pre-Amp OUT not working?
a. Please make sure the connection is correct.
b. Please make sure the slide position is set at "Pre-Amp OUT".
What kind of grabbing program to use?
Please use the existing recording program in your OS or try to download free audio programs from Internet.
IMPORTANT NOTICE
For indoor use only
•
It is not allowed to open the housing, there is no serviceable part in the unit
•
Keep it away from water and high humid place
•
USER MANUAL
cassette
07