Operation - Inakustik PHONO PRE AMP Bedienungsanleitung

USER MANUAL

2.1 OPERATION

A. Play the phonograph
B. Select the MM/MC position for different
type of pickup head of turntable
C. Now you can start working with your audio
grabbing program on PC /notebook
3.0 PHONO PREAMPLIFIER (STAND ALONE OR OPERATED WITH PC AT THE
SAME TIME)
A. Connect audio cable R,L
to turntable player and USB Pre-Amp.
B. To prevent hum and noise recommended
the drive of the turntable is to be joined
by his ground wire to the ground screw
of the phono preamplifier. Connect the USB cable
with PC (or notebook) and the USB Pre-Amp as the
illustration.
C. Get the USB
your power supply and the Pre-Amp.
Connect 3.5mm
and then connect the "Line In/Pre-Amp Out" port and
the Audio RL end to your stereo amplifier.
06
D. Set the slide on the USB preamplifier to "Pre-Amp Out" position
3.1 Operation
A. Connect the phonograph turntable with USB preamplifier
B. Play the phonograph
C. Select the MM/MC position for different type of pickup head of turntable
D. Select the correct input on your Amplifier.
R,L (optional)
mini USB cable, and then connect with
Audio R, L cable (optional),
Power
Supply