Connect With An Aux Cable - Alphatronics alphatronicsSound 1.4.0 Bedienungsanleitung

power button on the soundbar remote control.
Note:
• If the soundbar does not find another device after 2 minutes it will automatically
connect to the last paired device.
• The soundbar will also disconnect if the other device is placed out of range.
• If the connection is lost, follow the above instructions to reconnect the devices.
Supported Bluetooth profiles
• If the paired Bluetooth device supports BT2.1 / BT3.1 / BT4.0 / BT4.2, you can play
back sound from the paired device through your soundbar.

Connect with an AUX cable

Connect the soundbar using the audio cable supplied or with the COAX audio cable with AUX
In or Coaxial.
Using the button on the remote control, you can switch from Bluetooth to another input.
30