Werbung
First use:
Connect the yellow legs to the heating plate before its first
use. Put the heating plate on its side and insert a leg into
each of its corners. To insert the leg, push the yellow slide
(PUSH) and insert the leg with the round end upward, until
you have reached the desired height. Release the slide.
If you hear the slide "clicking" the leg has been secured
correctly. If not, please move the leg a little until you hear
it "click". Make sure all legs are secured!
60 min
Adjusting the height:
The Comfort heating plate should increase in height along
with your chick's growth - This way the chicks get the
warmth they need in each growth phase. As your chicks
grow, adjust the leg height at least once a week.
You may use the height of the chicks as a guideline for
the adjustment of the leg height of your heating plate.
During the first days it is advisable to slightly reduce the
height of the heating plate to make sure they get the heat
they need. The use of measuring instrument to check the
ideal temperature is not necessary. The chick's behaviour
will tell if the height is right or not.
Suggestion: one chick is not the same as the other one.
Therefore, adjust 2 legs of the heating plate on one side
slightly lower than the other side. This way the heating
plate will be sloping and the goal of the perfect height
setting for every chick is therefore achieved, regardless
their differences in the chick's growth and warmth need.
1
3
When all legs have been mounted to the right
height, the heating plate can be placed into the
rearing unit. Connect the plug to the power supply
and you will see the red LED indication lighting
up. After approximately 60 minutes the maximum
temperature will be reached, and the chicks can
be released near the heating plate.
Guide Comfort heating plate
2
4
5
Werbung
