GRAVITY KSX 2 T Bedienungsanleitung

KSX 2 T
TILTING TIER FOR GKSX KEYBOARD STANDS
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Adam Hall GmbH · Adam-Hall-Str. 1· 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
FEATURES
• Simple to install
• Easy adjustment
• Variable tilting angle
• Compact
DESCRIPTION
Tilting tier for Gravity X-type keyboard stands. Upgrade your keyboard stand
by attaching a second tier for an additional keyboard. The universal and
easy to use mounting and adjustment options require no tools whatsoever.
The tilting angle of the tier is adjustable in fine incremental steps – markings
on both arms help in finding the right angle. The tier is compatible with tubes
measuring an inner diameter of at least 20 mm.
SPECIFICATIONS
Product type
Type
Material
Surface
Colour
Decks
Max. support depth
Support arm spacing
adjustment range
Max height
Max load (support)
suitable for inner pipe
diameter
Interchangeable rings
Black ring pack included
Weight
Stands and Tripods
Keyboard stands
Steel
Powder coated
Black
1
400 mm
490 - 740 mm
300 mm
15 kg
20 - 30 mm
2 x 15 mm, 2 x 30 mm
Yes
1.8 kg