GRAVITY GKSRD1 - KS RD 1 Bedienungsanleitung

KSX 2 RD
SET WITH KEYBOARD STAND X-FORM DOUBLE AND RAPID DESK 1
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation
and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other
information from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead
to product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal
of packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings,
please contact your local distributor.
MANUFACTURER'S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARA-
TIONS_GRAVITY.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-Hall-Str. 1, 61267 Neu Anspach / Email Info@adamhall.com /
+49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product,
indicates that this appliance may not be treated as household waste. This is
to avoid environmental damage or personal injury due to uncontrolled waste
disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity.
Gravity ® is a registered brand of the Adam Hall Group
Adam Hall GmbH | Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
FEATURES
• Set with GKSX2 keyboard stand and GKSRD1 Rapid Desk 1
• Extremely rugged steel structure for a high load-bearing capacity
and stability
• Quick and easy set-up
• Ideal for DJ controllers, DJ mixers, laptops and rack synthesizers
• Air vents for optimum ventilation of instruments
DESCRIPTION
Especially on tour it is important that all instruments, equipment and acces-
sories are compactly packed and can be easily stowed away in the bus.
That's why the Gravity KSX2RD set combines the stable Gravity KSX2 keyboard
stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy
for you to put up a sturdy table in a few simple steps and also to take it down
into two separated flat pieces. Plus, this combination works in pretty much
every situation, no matter if you're playing in the studio or practicing in the
rehearsal room.
Measuring 100 cm wide and 48 cm deep, its large table surface provides
you with plenty of room to arrange your laptop, DJ mixer, controller or even a
small rack synthesizer just the way you like. The stand and tabletop can hold
up to 60 kg in weight, whereas the vents in the powder-coated steel Rapid
Desk 1 ensure your equipment is kept perfectly cool. In terms of set-up, all you
have to do is slide the upper bars of the keyboard stand into the slots locat-
ed on the bottom middle of the Rapid Desk 1 and then open the X-stand.
There's absolutely no need to fasten or screw tight the desk.
SPECIFICATIONS
Product number GKSRD1 – KS RD 1
Product type Stands and Tripods
Type Keyboard stands
Weight 6.62 kg
Material Steel
Surface Powder coated
Color Black
Decks 1
Max. support depth 480 mm
Min height 100 mm
Max height 900 mm
Max load (support) 60 kg
Interchangeable rings 1 x 15 mm, 4 x 20 mm,
4 x 30 mm
Black ring pack Yes
included
Total weight
GKSX2 – KSX 2
Stands and Tripods
Keyboard stands
4.45 kg
Steel
Powder coated
Black
1
400 mm
100 mm
900 mm
65 kg
1 x 15 mm, 4 x 20 mm,
4 x 30 mm
Yes
11.36 kg