Before first Use
is
Remove the lighted magnifier and check all parts for any
damage in transit. Dispose of any non-reusable packaging
material properly or store it in a safe location out of reach
of children.
Inserting the Batteries
1. Open the battery compartment and insert
2 fresh batteries of the type LR6 (AA). Ob-
serve correct polarity. The polarity symbols
are shown inside the battery compartment.
2. Close the battery compartment.
3. To switch on the lighted magnifier, push the
ON/OFF switch.
4. To switch off the LED, push the switch once more.
Remove the batteries if you do not use the lighted
magnifier for long time.
Cleaning
Do not wipe the magnifier with sharp detergents or
aggressive chemicals in order not to damage the sur-
faces. To remove dirt or fingerprints, clean with a soft
cotton cloth. Do not use scraping cloths to avoid
scratching the lens.
Wipe the housing with a dry cloth only.
Store the lighted magnifier in a dry place, protect the
unit from dust and dirt and keep it out of reach of chil-
dren.
Operating
13