Inhaltsverzeichnis
Werbung
Pressure
Plate
Alignment
Icon
Back
Front
Place material to be cut
against the foam side of the
die. Place the material and
foam against the Cutting
Pad, foam side down.
Slide the Cutting Pad with
die and material into the
machine until the first
alignment icon (indicated by
a star (1) and a line on the
back of the die) is at the
front edge of the Pressure
Plate.
6
Make the first cut by
lowering the handle, keeping
a firm grip. Next, raise the
handle, keeping a firm grip.
7
Slide the Cutting Pad toward
the back of the machine
(while not disturbing the die
and material) to the second
alignment icon, (a star (2)
and a line on the back of the
die). Complete the second
cut by repeating
step 6.
Keep clear of handle
arc when handle is in
motion to avoid being
hit by the handle.
5
Werbung
Inhaltsverzeichnis
