Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Function Elements:
Operation:
Connect the device with an electric outlet.
Turn STROM [6] and SPANNUNG [3] counter clockwise to the stop.
Switch on the device with I/O [8].
Adjust the desired output voltage and the desired output current with the help of SPANNUNG [3] and
STROM [6]. Each effective value is shown on the displays [2 & 1].
Connect the desired consumer load to the terminals + and –.
Adjustment of a Constant Voltage (C.V.):
Turn STROM [6] clockwise up to the stop.
Turn SPANNUNG [3] counter clockwise to the stop.
Switch the device on with I/O [8].
Now the green LED C.V. [4] should show.
Now adjust the desired output voltage with SPANNUNG [3] and the help of the display [1].
Connect the load to the terminals [7] of this device.
Adjustment of a Constant Current (C.C.):
Turn STROM [6] counter clockwise up to the stop.
Turn SPANNUNG [3] counter clockwise to the stop.
Switch the device on with I/O [8].
Short circuit the output terminals by connecting [7].
Turn SPANNUNG [3] clockwise until the red LED C.C. [5] shows.
Turn STROM [6] clockwise until the display [2] shows the desired maximum output current.
Removing the wire from the terminal to end the short circuit.
Connect the load to the terminals [7] of this device.
Do not change the value of the output current as long as the load is connected.
ETT Distribution GmbH Schmalbachstraße 16 38112 Braunschweig Nachdruck oder
Vervielfältigung nur mit ausdrücklicher Genehmigung Stand 02/ 2019
1. LCD- display of the effective output voltage.
2. LCD- display of the effective output current.
3. SPANNUNG: Adjustment of the output voltage.
4. C.V.: Green LED shows constant voltage.
5. C.C: Red LED shows constant current LED.
6. STROM: Adjustment of the output current.
7. +/-: Terminal with safety nuts. Positive and negative
outlet.
8. I/O: On-/Off-switch.
542-231
Werbung
