iQOS 2.4 Bedienungsanleitung Seite 34

64
automatic self-cleaning process of
the heater
Your iQOS System already has a built in
automatic self­cleaning process.
EN
However, you should use the iQOS
Cleaner regularly to clean the cap and
the body of your iQOS Holder manually.
You will find more details about how to
use the iQOS Cleaner on the following
pages.
After every 20 HeatSticks, your iQOS
Pocket Charger will automatically start
the cleaning process of the iQOS Holder's
heater. You will then observe the following
LED notifications on your Pocket Charger's
LED display:
heater cleaning Status Led
2.3
blinking green: The cleaning process
of the heater is in progress.
holder Battery Status Led
2.1
blinking green: The cleaning process
of the heater is over and the iQOS
Holder is recharging.
As soon as all LED turned off, the
cleaning and the recharging process
are over.
Automatic cleaning of your
iQOS Heater will start only
when holder is fully charged.
Led Led
notification 1 notification 2
Holder
Battery
Status
LED
2.1
2.3
Heater
Cleaning
Status
LED
Manual start of the automatic
self-cleaning process
Before using the iQOS Cleaner,
please manually start the automatic
self­cleaning process of the heater.
To do so, press and hold the Heater
Cleaning Button
3
Cleaning Status LED
green. As soon as all LED turned off,
the cleaning and the recharging
process are over.
Afterwards, please use the iQOS
Cleaner to clean the heater manually.
The manual cleaning process only
requires few steps as described on
the following pages.
Manual
start of the
automatic
self-cleaning
process
Heater
Cleaning
Button
3
until the Heater
starts blinking
2.3
back to contents
65
EN