Control Panel - AWT E-Serie Montage- Und Bedienungsanweisung

Controlpanel
1. Most buttons will give a acousitc feedback.
2. Power
2.1 Touch the button for 2 seconds to turn on the pool, this also switches on the lights.
hold this button 2 seconds to switch the pool off.
3. Navigation & lights
3.1 If the pool is switched on, use
3.2 To switch on the on or off make sure the cursor is placed on the symbol and touch
4. Child lock
4.1 After 3 minutes of inactivity the pool enganges the child lock.
The display shows "LOCK". touch and hold any button to unlock, "LOCK" will now
disapear from the display.
5. Ozone
5.1 Use the navigations buttons till the cursor is on the symbol and touch
5.2 The ozone will be turned off automatically after 10 minutes.
6. Massage funktion
6.1 The pool is provided with a water level sensor this prevents the water pump
from switching on without enough water. This prevents the pump from overheating.
6.2 Use the navigations buttons till the cursor is on the symbol and touch
massage function. Touching the button again will switch of the massage function.
The icon is displayed dynamically.
6.3 The massage function will only start if the pool has enough water.
26
Power/Setting
and to navigate left or right.
Left Right
to start the
OK
OK
.
to start the ozone.