Specifications - Kruger&Matz ODYSSEY Bedienungsanleitung

Remote control does not work
• Use the remote control near the unit.
• Point the remote control at the remote
sensor on the unit.
• Replace the battery in the remote control
with a new one.
• Remove any obstacles between the
remote control and the unit.

SPECIFICATIONS

GENERAL
• Sound technology: Dolby Atmos
• Bluetooth: 4.2
• Bluetooth range: up to 8 m
• Frequency bands: 2402 ~ 2480 MHz
• Max. power transmitted: < 5 dBm
• I/O: 2x HdMI input, HdMI output (ARC), optical input, coaxial input, USB port,
AUX-in (Jack 3,5 mm)
• external devices charging: yes (5 v; 0,5 A)
• Supported formats: A2DP, AVRCP
• Mounting: horizontally, on a wall
SOUNDBAR
• Type: active
• Speakers
- Center: 2x 2", 50 W RMS, 4 Ω
- Left: 2", 25 W RMS, 8 Ω
- Right: 2", 25 W RMS, 8 Ω
- Upper left: 2"+20 mm, 25 W RMS, 8 Ω
- Upper right: 2"+20 mm, 25 W RMS, 8 Ω
- Side left: 2", 25 W RMS, 8 Ω
- Side right: 2", 25 W RMS, 8 Ω
• Frequency response: 120 Hz – 20 kHz
• THD: 10%
• Audio input sensitivity: 700 mV
• S/N: 70 dB
• Power consumption in standby: <0,5 W
• Power adapter
- Input: 220-240 v; 50/60 Hz; 4 A
- Output: 23 v; 4 A
SUBWOOFER
• Type: active
• Speaker: 8", 180 W RMS, 3 Ω
• Frequency response: 40 Hz – 120 Hz
• THD: 10%
• Frequency bands: 2400 ~ 2483 MHz
• Max. power transmitted: < 10 dBm
• power supply: 220-240 v; 50/60 Hz; 3 A
34
The device turns off on its own
When the unit's external input signal
level is too low, the unit will be turned off
automatically in 15 minutes. Please increase
the volume level of your external device.
Owner's manual