Maintenance - Heinner HBL-500R Bedienungsanleitung

www.heinner.com
Important operating tips
1. For best circulation of food that are to be blended with some liquid, pour the liquid into
the jar first then add solids.
2. Some of the tasks that cannot be performed efficiently with a blender are: beating egg
whites, whipping cream, mashing potatoes, grinding meat, mixing dough, extracting juice
from fruit and vegetable
3. The following items should never be placed in the unit as they may cause damage: bones,
large pieces of solid, frozen food, or tough foods such as turnips.
4. To crush ice, add up to 6 ice cubes. If more ice is needed, remove the cup and add cubes
one by one through the lid opening.
VII. MAINTENANCE
This product contains no user serviceable parts. Refer service to qualified service
personnel.
1. Before cleaning, unplug the blender.
2. Always wash immediately after use for easier cleaning. Don't let food dry on the jar
assembly as this will make cleaning difficult.
3. Pour a little warm soapy water into the jar and turn the knob to P position for a few
seconds. And then empty the jar.
4. Dismantle all detachable parts. Lift the assembled jar off the motor unit, then unlock
the jar base from the jar assembly, take the blade assembly and the seal ring 2 out,
finally remove the cup and the lid. Detach the seal ring from the lid.
5. Rinse the cup, lid, seal ring 1, jar, seal ring 2 and jar base by hands or in a dishwasher
and then dry. They are dishwasher safe components, but the temperature setting shall
not exceed 70℃.
6. Brush the blade clean using warm soapy water, then rinse thoroughly under the tap.
Don't touch the sharp blades, handle carefully. Don't immerse the blade assembly in
water. Leave to dry upside down away from children.
7. Wipe the motor unit with a damp cloth and dry thoroughly. Remove the stubborn
spots by rubbing with non-abrasive cleaner. If liquids spill into the motor unit; first
unplug the unit, then wipe with a damp cloth and dry thoroughly.
CAUTION
1) Do not immerse the motor unit in liquid to prevent the risk of electric shock.
2) Do not use rough scouring pads or cleansers on parts or finish.
500W, 50Hz-60Hz, 220-240V
6