Second Time Zone; Alarm; Snooze Feature; Timer (Max. 23:59:00) - Pro 1-Ld4677 Bedienungs- Und Sicherheitshinweise

The display will show
HOLD HALTEN=
TO SET EINST.
and the 12 or 24 hour selection will blink on the display.
Press SEL to select a setting and confirm your setting by pressing SET. Set the
seconds, minutes, hours, year, month and day in the same way. Now follow the
instructions in "Setup of the heart rate monitor" to adjust the basic settings.
Exit setting mode by pressing MODE.

Second time zone

Press and hold SEL for 3 seconds. The watch will switch to the second time zone
display and T2 will appear on the display. Press and hold SET for 3 seconds. The 12
or 24 hour selection will blink on the display. The second time zone can be set as
described in "Setup of the heart rate monitor".
Press and hold SEL for 3 seconds to return to normal time mode.

Alarm

ALARM ALARM
Press and hold SET for 3 seconds to enter setting mode.
"AL" will appear on the display and the minutes of the alarm time will blink.
Press SEL to set the minutes and press SET to confirm your setting. Set the hours in the
same way.
You may optionally set the month and day as well.
If neither month nor day are set the alarm will sound daily. If the day is set, the alarm
will sound monthly. If both the month and the day are set the alarm will sound only
at the set date.
The hourly chime setting will now appear on the display
CHIME STDALARM
Press SEL to select a setting and confirm your setting by pressing SET
(ON/EIN/ACTIF/ENCENDID=on,
OFF/AUS/INACTIF/APAGADO=off).
MAINT= MANT=
REGLER AJUST
ALARM ALARMA
SIGN HOR HORA AL
- 81 -
If the chime is activated, the bell symbol will appear and the watch will chime at the
beginning of every hour.
Exit setting mode by pressing MODE. The alarm can be activated or deactivated by
pressing SET. If the alarm is activated the alarm symbol
When the alarm sounds, press SET, SEL or MODE to stop the alarm.

Snooze feature

If no button is pressed when the alarm sounds, the alarm will shut off after about 30
seconds and the symbol will blink on the display. The alarm will stop and will
resume after sounding after about 90 seconds. The process will repeat itself 4 times.

Timer (max. 23:59:00)

TIMER TIMER
Press and hold SET for 3 seconds to enter setting mode.
The minutes of the timer time will blink on the display.
Press SEL to set minutes of the timer time and confirm your setting by pressing SET.
Set the hours in the same way.
Now the additional settings for the timer will follow. Press SEL to select the desired
mode:
Cd r After reaching 0:00 the timer will count the set time again
Cd U After reaching 0:00 the timer will count forward
Cd S After reaching 0:00 the timer will stop
Exit setting mode by pressing MODE.
The timer can be started or stopped by pressing SET.
Press and hold SET to reset the timer.
After the timer time is up an alarm will sound.
will appear.
COMPTE TIMER
- 82 -