AGK 10542 Bedienungsanleitung Seite 4

FAQ
If you are unable to connect the mouse to the receiver, or the mouse is
not working properly, please try the following steps:
1. Unplug and insert the Mini USB Receiver into your computer's USB
port.(Normally there will be ringtons showing Adding & Removing
hardwares.) Then do the connecting step again.
2. If no ringtons or pop-up window showing adding new hardware, then
change another USB port and try again.
3. If Mini USB Receiver identified, but mouse still couldn't auto-connect
to receiver, turn off the power switch, unplug and insert the Mini USB
Receiver to USB port again. Turn the power switch on, move your
mouse to receiver within 1 meter range, press the Connect button to
manually connect mouse to receiver.
4. If mouse cursor move not smoothly or stopped moving after a while,
kindly check if battery power is low, and replace a new pair of AA
batteries.
Note on using batteries
1. Keep batteries out of children's reach.
2. Do not mix old and new batteries or use different types of batteries
simultaneously.
3. Replace old or low power batteries promptly.
4. When not using mouse for a long period, please take out and put
away the batteries.
5. Dispose of and recycle old batteries in accordance with your local
regulations.
4