Maintenance And Cleaning - nemaxx EB52 Bedienungsanleitung

KEN002EB52

MAINTENANCE AND CLEANING

Before each maintenance and cleaning work
• Stop the engine.
• Wait until the cutting device does not longer move.
• Remove the spark plug connector.
• Wear protective gloves in order to avoid injury to the hands.
• Do not carry out maintenance work close to open flames. Risk of fire.
Maintenance and repair work other than those described in this chapter is only allowed to be
carried out by service staff.
For maintaining and cleaning, removed security devices must unconditionally be mounted
properly and proved again.
Only use genuine spare parts. Other than genuine parts may result in unpredictable
damages and injury.
Maintenance
The tool will not come to a standstill immediately after cut-off. Before starting any service
work wait until all parts are stationary.
To guarantee a long and reliable usage of the product carry out the following maintainance
works regularly.
Check the device for obvious defects such as
• loose fastening elements
• worn or damaged components
• correctly assembled and faultless covers and protective devices
Necessary repair works or maintainance have to be carried out before using the machine.
EN
17
v04 • 22.05.2017