Renkforce 2112722 Bedienungsanleitung Seite 3

Operating instructions
USB-C 11-in-1 docking station
Item no. 2112722
Intended use
This docking station is intended to connect up to 11 additional devices using only one USB-C
port of a laptop or mobile device (e.g. smartphone, tablet). HDMI, VGA and Mini DisplayPort
ports are available for connecting monitors. Observe the information in the Technical data
section for the compatible operating systems.
This product is intended for indoor use only. Do not use it outdoors. Contact with moisture
(e.g. in a bathroom) must be avoided under all circumstances.
For safety and approval purposes, do not rebuild and/or modify this product. Using the product
for purposes other than those described above may damage the product. In addition, improper
use can cause hazards such as a short circuit or fire. Read the operating instructions carefully
and store them in a safe place. Only make this product available to third parties together with
its operating instructions.
This product complies with statutory, national and European regulations. All company and
product names contained herein are trademarks of their respective owners. All rights reserved.
HDMI is a registered trademark of HDMI Licensing L.L.C.
Package contents
• USB-C 11-in-1 docking station
• Operating instructions
Up-to-date operating instructions
Download the up-to-date operating instructions at www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Current software
Follow the link www.conrad.com/downloads or use the QR code shown to find the current
drivers for various operating systems. See the Technical data section.
Explanation of symbols
The symbol with an exclamation mark in a triangle is used to highlight important
information in these operating instructions that must be observed.
The arrow symbol indicates special information and tips on how to use the product.
Safety instructions
Read the operating instructions and safety information carefully. If you do
not follow the safety information and information on proper handling in these
operating instructions, we will assume no liability for any resulting personal
injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) Persons / product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. It may become a
dangerous plaything for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, stop using it and prevent
unauthorised use. Safe operation can no longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stress.
• Handle the product carefully. Jolts, impacts or a fall even from a low height may
damage the product.
• Never use the product immediately after it has been brought from a cold room
into a warm one. The condensation that forms may destroy the product. Allow the
product to reach room temperature before connecting it and putting it into use.
This may take several hours.
• When setting up the product, make sure that the cables are not pinched, kinked
or damaged by sharp edges.
• Always lay the cables so that nobody can trip over or become entangled in them.
This poses a risk of injury.
• The product must be easily accessible at all times.
• Do not listen to excessively loud music over an extended period of time. This may
damage your hearing.
• Consult a technician if you are not sure how to use or connect the product, or if
you have concerns about safety.
• Maintenance, modifications and repairs must be carried out by a technician or a
specialist repair centre.
• If you have any questions which are not answered in these operating instructions,
contact our technical support service or other technical personnel.
b) Connected devices
• Always observe the safety instructions and operating instructions of any other
TM
devices which are connected to the product.
Product overview
1 2 3 4
1 3.5 mm audio jack
2 3x USB3.0 ports
3 MicroSD card slot
4 SD card slot
5 RJ45 Ethernet port
6 MiniDP port (Mini DisplayPort)
Setup
Observe the information in the Technical data section for the compatible operating
systems. Not all operating systems are compatible with this product. Some product
ports require installation of drivers when using certain operating systems. See the
section "Current software".
• The docking station can be placed under a laptop or next to it.
• The rubber pads (10) are designed to prevent slipping when the docking station is placed
under a laptop.
• The docking station has non-slip rubber feet on its bottom. Note that rubber feet can leave
marks on sensitive surfaces. If necessary, place a suitable base on the surface.
• Connect the cable with the USB-C
device.
When a USB-C
TM
charged while transmitting data through other ports.
• Two monitors connected to the HDMI (7) and VGA (8) ports can be used simultaneously. The
MiniDP port (6) can only be used separately.
• Connect other devices such as a mouse and keyboard to the USB3.0 ports (2) and a network
cable to the RJ45 Ethernet port (5). Use the 3.5 mm audio jack (1) to connect headphones
or speakers.
When connecting the USB-C
device, the mouse or other external device will not work immediately. It may take
several seconds for an external device to be activated.
When connecting a monitor to a VGA port of a laptop, a delay of several seconds
may occur.
• Insert a memory card into the MicroSD card slot (3) or the SD card slot (4) if you want to
use a memory card of appropriate size. Make sure your mobile device has sufficient battery
capacity. A suddenly discharged battery can lead to data loss during data transfer.
• Connect a USB-C PD charger to the PD port (9) to power the docking station (max. 60 W)
TM
or to charge the battery of a connected device. Data transfer and battery charging from a
connected device can be carried out simultaneously. The PD (Power Delivery) port enables
to quickly charge a suitable device.
When a USB PD charger is plugged in or disconnected from the PD port, the
connected USB device is momentarily disconnected and reconnected within a few
seconds. To avoid data loss, do not plug in or disconnect the USB PD charger during
data transfer.
5 6 7 8
7 HDMI port (monitor connection)
8 VGA port (monitor connection)
9 PD port (USB-C
10 Rubber pad (for laptop)
11 Cable with USB-C
plug (11) to a USB-C
port of your laptop or mobile
TM TM
PD charger is connected to the PD port (9), a laptop can be
plug to a USB 3.0 Type-A port of a laptop or mobile
TM
9 10 11
PD charger connection)
TM
plug
TM