MOUNTING FOR ADDITIONAL FUEL TANK 5
–
Push the additional fuel tank on fully.
–
Plug left and right hose section
into center section
500819-01
–
Plug left connector from fuel hose
additional fuel tank wiring harness
–
Plug fuel hose
500820-01
–
Plug the right connector from additional fuel tank wiring har-
bm
ness
into the additional fuel tank, route cable without ten-
sion and secure to mounting base
500821-01
–
Route hoses
bq
system
without tension to the activated carbon filter.
–
Connect hose section
–
Connect hose section
Info
Ensure that all cables and hoses are routed without
tension. Secure with cable ties, if necessary.
500822-01
–
Mount and tighten screw
kit scope of supply) on both sides.
Guideline
Screw, retaining
bracket on fuel tank
–
Mount blind rivet nut
scope of supply) on both sides.
500823-01
C
from short fuel hose
B
.
A
into connector from
bm
.
A
bn
into long fuel hose
.
dm
with a cable tie.
D
F
and
from activated carbon filter hose
D
at T marking.
F
from EVAP valve to P marking.
el
(additional fuel tank assembly
M5x16
6.5 Nm (4.79 lbf ft)
cq
(additional fuel tank assembly kit
bo
27