English - Kenwood ICK01 Bedienungsanleitung

The Stratum Multicare Accessory Kit
contains a range of accessories
suitable only for garment and fabric
care including clothes, fabrics and
upholstery.
key
steam gun attachment outlet
fixed guard
clip
connector
steam gun
steam safety lock
steam button
storage box
fabric cleanser
comb brush
odour cleanser/crease remover
hard bristle brush
soft brush
stain removal nozzle
cloth
sponge
safety
Keep children away from the steam
●
gun and do not let them play with
any parts.
When fitting or removing any of the
●
attachments to the steam gun,
always move the steam safety lock
towards the steam button to lock
into place. This will prevent
accidental operation of the steam
button.
Care should be taken when using
●
the appliance due to the emission of
steam.
Never point the steam gun towards
●
anyone and keep your hands and
other parts of your body well away
from any steam emitted from the
outlet.
Don't get burnt by steam or hot
●
water coming out of the steam gun.
Never iron or clean clothes when
●
they are being worn.
The trailing cord can be a hazard, so
●
keep out of the way to prevent
accidents. During pauses in
cleaning, use the clip on the steam
gun for stowage. Do not allow the
cord to become entangled with the
power cord or iron cord (if
applicable).
Parts of the attachment will get hot
●
in use such as the steam supply
cord and parts of the steam gun, so
take care when handling.
● After use unplug the steam
station from the power supply
and allow the appliance to
cool for 3 minutes before
detaching the steam gun
connector from the appliance.
● Before commencing to clean or iron
the fabric or garment, always read
the care label.
fitting the steam gun to
the steam station
1 Lower the outlet cover, then with the
red section on the connector
uppermost push onto the outlet
Remove the connector by pressing
●
the red section and withdrawing
from the steam station. Never
remove the steam gun by pulling on
the cord.
fitting the attachments
to the steam gun
Always make sure the steam
safety lock is in the locked
position before fitting or
removing attachments.
steam safety lock
The steam safety lock allows you to
lock the steam button in place to
prevent its accidental operation - do
this by moving the steam safety lock
towards the steam button. To
release the steam safety lock (in
order to operate the steam button),
move the steam safety lock away
from the steam button.
2
.