Product Description; Technical Data; Prior To Use - rawlink 79574 Gebrauchsanweisung

injection injury:
Always wear a face shield, safety goggles,
rubberized gloves and protective
clothing when checking for leaks.
Release all pressure from the system
before you inspect it.
Do not use your hands to detect a
� uid leak. Use a large piece of wood,
cardboard or paper and watch for
discolouration.
Replace damaged parts with identical
manufacturer's parts to ensure they are
rated to handle the pressure.
WARNING! The warnings and instructions
given in this instruction manual cannot
cover all possible conditions and situations
that may occur on the worksite. It must be
understood by the operator that common
sense and caution are factors, which cannot
be built into any product, but must be
applied by the operator.

PRODUCT DESCRIPTION

Parts
1. Handle
2. Hydraulic cylinder handle
3. Rear castors
4. Leg locking pins
5. Front castors
6. Cylinder lock/ Release valve
7. Hydraulic cylinder unit
8. Lifting hook
9. Boom
10. Boom locking bolt
36

TECHNICAL DATA

Max. Capacity
Max. Height
Boom length
Weight
This product ful� ls the requirements of
quality class HA 2807.

PRIOR TO USE

Unpacking
WARNING! Do not operate the appliance if
any part is missing. Replace the missing part
before operating. Failure to do so could result
in a malfunction and personal injury.
Remove the parts from the packaging and
inspect for damage. Make sure that all items
in the parts list are included. If any part is
missing or damaged, contact your dealer.
2000 kg
2300 mm
900-1450mm
70 kg