Introduction - Sony PGGA-BM1 Bedienungsanleitung

Introduction

To use this unit for communication with a notebook, setup must be
completed in the following sequence.
Verify that all parts are complete.
See the section "Supplied Accessories" (page 5) in this document.
When using the PCG-SR31K or PCG-C1VFK, update the
Bluetooth device driver.
See the section "Bluetooth Device Driver" (page 6) in this document.
This step is not necessary when using a computer model other than the PCG-SR31K
or PCG-C1VFK.
Perform notebook bonding.
Carry out steps 1 - 4 in the section "Notebook bonding" (page 19) in the PCGA-
BM1 Operating Instructions.
Install the modem driver on the notebook.
See the section "Installing Modem Driver" (page 9) in this document.
Set up the PCGA-BM1 for the country of use.
See the section "Selecting the Country Code" (page 21) in the PCGA-BM1
Operating Instructions.
(Continued on next page)
GB
Continued on next page
GB
3