Samsung EP-PA710 Bedienungsanleitung Seite 279

Using the wireless charger
3
When the mobile device is fully charged, remove it from the wireless charger.
Do not place foreign materials, such as metal objects, magnets, and magnetic stripe
cards, between the mobile device and the wireless charger. The mobile device may
not charge properly or may be damaged due to overheating.
• W hen the mobile device is not placed on the charging surface properly, or
depending on the location of the mobile device's wireless charging coil, your
mobile device may not charge properly.
• W ireless charging may not work properly if you have attached a thick case to your
mobile device. If your case is thick, remove it before placing your mobile device on
the wireless charger.
• I f you use the wireless charger in areas with weak network signals, you may lose
network reception.
• I f you connect a charger to the mobile device during wireless charging, the
wireless charging feature will be unavailable.
• T he wireless charger is compatible with Wireless Power Consortium (WPC) certified
devices.
• T he fan inside the wireless charger may operate during wireless charging.
• T o save energy, unplug the charger when not in use. The charger does not have a
power switch, so you must unplug the charger from the electric socket when not in
use to avoid wasting power. The charger should remain close to the electric socket
and be easily accessible while charging.
English (USA)
8
6