Firefield TACTIAL MAGNIFIERS FF19020 Bedienungsanleitung Seite 7

MOUNTING
Firefield Tactical Magnifiers are designed for use in conjunction with holographic, collimated reflex, and
other compatible weapon sights. When mounting, be sure the magnifier is placed behind the sight.
Before mounting the magnifier onto your firearm, be sure it is UNLOADED and safe to handle. Do NOT
attempt to mount the magnifier on a loaded weapon.
1) With the provided hex wrench, loosen the bolts that hold the top of the mount onto the mount's base.
Remove the top piece from the rest of the mount.
2) Place the body of the magnifier onto the mount base. Position the top of the mount over the magnifier
body, aligning it with the mount base.
3) Re-tighten the bolts with the hex wrench until they are secure. DO NOT overtighten, as this may
cause damage to the magnifier.
4