Fimei MK-37/C Bedienungsanleitung Seite 9

the both safety covers of mixer and grinder are placed on and the power
cord is disconnected.
2. Lift the rise knob up so as to move the swiveling arm upwards.
3. Attach the dusty cover (Fig.1, No.14).
4. Insert the dough hooks, mixing beater and egg whisk on the driving shaft
and lock clockwise to the limit stop.
Notices
1. The instructions on the Operation Manual must be strictly observed.
2. Prior to operation, please lock the machine head. Otherwise, the
machine will not start for the purpose of safety safeguarding.
3. Knead dough at the gear 1 or gear 2. Do not knead dough at a higher
gear or gear "P". Otherwise, the machine will be over-loaded, and
damage may be caused. Such kind of damage will be beyond the scope
of guarantee.
4. For safety, make sure the pouring shield properly before operating the
machine. Do not close to the beater during the operation time.
5. Be carefully to open or close the up and down body. Please do not
directly press or raise the machine head abruptly. Otherwise, damaged
may be caused and such damage is beyond the scope of guarantee.
6. Place the machine on the smooth and flat table to ensure the stability of the
operation.
English