Installation - INNOBIZ elia Bedienungsvorschrift

Installation:

1. The device must be placed on smooth, horizontal surface.
2. Connect the mains adapter (C) to the diffuser, without plugging it into
the mains.
3. Remove the top cover (A).
4. Use tap water at room temperature (do not use demineralized water)
to fill the reservoir in the base (B) with a maximum of 100 ml (do not fill
higher than the maximum water level mark [2]).
5. Add between 5 and 15 drops (maximum) of the essential oils to be
diffused to the water.
6. Put the top cover (A) back on the base (B).
7. Plug the mains adapter (C) into a mains socket.
8. To turn your Céralia on, press the top of the device. This gesture will
activate the on/off switch on the underside of the device.
Successively pressing the device will provide several operating modes:
1 press: diffusion of mist + lights with changing colors
st
2 press: diffusion of mist + fixed light in the last color that appeared
nd
3 press: diffusion of mist without light
rd
4 press: the device turns off (neither mist nor light)
th
8
en