General Information - QIMMIQ VR 360 Bedienungsanleitung


The product is equipped with a built-in battery. Do not put it directly into
fire, or it may cause explosion or other dangers.

The product may radiate heat due to long-time use or exposure to direct
sunlight. This is normal.

If the camera stops working or fails to respond to any operation during use,
use a needle to press and hold Reset button for about 3 seconds to restart
the product.

Do not use the camera under any environment with temperature lower than
0℃ or higher than 40℃; or else it may not turn on normally.

Do not use the camera in humid place, for the humidity may damage
important parts of the camera.

Do not put the camera directly into water.

Do not use the camera during charging, for it may cause system halt or
other failure due to improper heat radiation.

Do not contact the lens with hard articles to avoid any damage.

GENERAL INFORMATION

Warranty and after-sales services
This device comes with a 24-month warranty, starting from the purchase date.
For more information on the applicability of this warranty, please contact our
after-sales service: assistance@sopeg.com
After-sales service information
SC Tech
4 bis rue de la République, 16170 ROUILLAC, France
Email: assistance@sopeg.com
Manufacturer information
SOPEG SAS
Parc Burospace 2, Route de Gisy, BP24 91571 BIEVRES, France
Email: info@sopeg.com - Tel.: + 33 1 60 13 08 88
The product was put on the market for the first time in September 2016.
Google Play™ is a trademark of Google, Inc.
App Store™ is a trademark of Apple, Inc.
Wi-Fi™ is a trademark of Wi-Fi Alliance.
QIMMIQ™ is a trademark of JLCA Holding.