Notes Regarding Environmental Protection; Contact Information - Eufab 16466 Bedienungsanleitung

6.4 CHARGING A MOBILE DEVICE WITH A CHARGING CABLE
Consult the manual of your mobile device to find out how to charge the device. Connect your mobile
device using its USB cable. Plug the USB-A connector of the charging cable into one of the two USB-A
outlets of the inductive charger with portable charger (Positions 4 and 5 in the Overview). The display is
activated and the symbol indicating that there is a device connected to the USB outputs (Position 12 in the
Overview) is lit. Remove the mobile device from the inductive charger when the battery of your mobile
device has been charged. Press the button twice to switch off the portable charger with inductive charger.
7. MAINTENANCE AND CARE
7.1 MAINTENANCE
The portable charger with inductive charger is maintenance-free when used in accordance with the
intended purpose.
7.2 CARE
Clean the portable charger with inductive charger with a dry, soft cloth only. Do not use any aggressive
cleaning agents or solvent-based cleaners. Never allow liquids to ingress into the device.

8. NOTES REGARDING ENVIRONMENTAL PROTECTION

Do not dispose of electrical devices with the household waste! Electrical and electronic scrap
must be collected separately and disposed of in an environmentally responsible manner for
recycling. Please contact your community or city administration regarding disposal options
for electrical and electronic scrap.

9. CONTACT INFORMATION

EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
9