Assembly Floor Fastening - Extremis ANKER Bedienungsanleitung

4. Place the tabletop on the legs, as shown in the diagram above. Be careful: ensure the leg is always on the correct
side. Now attach the tabletop to the legs using 1 leg plate, 2 M8x50 bolts, 2 M8 lock washers and 2 M8 nuts for each
leg. Now tighten all the bolts, including those on the benches.
6. Insert the cover disc into the tabletop.

ASSEMBLY FLOOR FASTENING

WHAT YOU NEED
2 people
+/- 15 min.
Put the anchor plates between the legs as explained in
ANKER ASSEMBLY INSTRUCTIONS
step 1 of the
Attach the table to the floor using fasteners best suited
to the type of floor.
.
english 5