Herunterladen Diese Seite drucken

Intermec ScanPlus S Series Schnellstartanleitung Seite 10

Werbung

7 Regularity Statements
This product complies with directives 89/336/EEC and 73/23/EEC for :
Emission:
EN50081-1
EN55022
EN61000-3-2
EN61000-3-35
USA: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
CANADA: This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
AUSTRALIA-NEW ZEALAND: This equipment has been tested and found to conform to the directives
concerning Class B digital devices, prescribed by the Australian and New-Zealander standard AS/NZS 3548
defined by the Spectrum Management Agency.
The information contained in this leaflet is for informational purposes only and is subject to change without notice. No part of this
leaflet may be copied or reproduced in any manner without the prior written permission of Intermec Technologies Corporation.
ScanPlus products are covered by patents issued or pending in the USA and other countries.
© Intermec Technologies Corporation All Rights Reserved
North America • 6001 36th Avenue West • P.O. Box 4280 • Everett, Washington 98203-9280 • 1 (800) 347-2636
tel • 1 (319) 369-3324 fax • Norand Mobile Systems Division • 550 2nd Street S.E. • Cedar Rapids, Iowa 52401
• 1 (800) 452-2757 tel • 1 (319) 369-3453 fax • Label Products: 1 (800) 227-9947 tel • 1 (513) 874-8487 fax
Europe/Middle East/Africa • Sovereign House • Vastern Road • Reading RG1 8BT Berkshire • United Kingdom • +44 118 987 9400
tel • +44 118 987 9401 fax • Label Products: +31 24 3723 100 tel • +31 24 3780 070 fax
Asia Pacific/Latin America • 6001 36th Avenue West • P.O. Box 4280 • Everett, Washington 98203-9280 • 1 (800) 347-2636
tel • 1 (319) 369-3324 fax • Label Products: 1 (800) 227-9947 tel • 1 (513) 874- 8487 fax
World-Wide Fax Document Retrieval Service • 1 (650) 637-2603 tel • 1 (800) 755-5505 (North America Only)
Internet • www.intermec.com
E-mail • info@intermec.com
(1992)
Immunity:
(1995) Class B
(1995)
(1995)
EN50082-1
(1992)
EN61000-4-2 (1995)
EN61000-4-3 (1996)
EN61000-4-4 (1998)
© 5/98 Intermec Technologies Corporation. All rights reserved. P/N 0-360049-01
10
Low voltage
EN60742
Directives :
(1995)

Werbung

loading