How To Set Drc (Dynamic Range Control) Value - HDigit Cuisine Bedienungsanleitung

English
How to Set Manual Tune?
Note: Sometimes, you might want find the radio station manually, and by following these steps, it can be
easily achieved.
→
1. Press MENU turn SELECT to < Manual tune >
channel number and frequency list.
2. Turn SELECT to scroll through the channels and press SELECT to select the radio channel.
Note: If there is a multiplex corresponding to this channel and frequency, the display will
show a tuning meter with the signal strength and the multiplex name after a few seconds.
3. Press SELECT to exit these steps.

How to Set DRC (Dynamic Range Control) Value?

You can set the level of compression of stations to eliminate the differences in dynamic range or sound level
between radio stations.
→
1. Press MENU turn SELECT to < DRC >, press SELECT to confirm.
Note: a. Setting DRC to off means no compression;
b. Setting DRC to low indicates minimum compression;
c. Setting DRC to high shows maximum compression.
2. Turn SELECT to browse options: off/low/high.
3. Press SELECT to confirm your preferred option, and it is done!
→
press SELECT to confirm, the display will show the
Cuisine
9