Important Safeguards - Opus MultiCREASE 30 Bedienungshandbuch

User's guide:
1 MultiCREASE 30
2 Description

3 Important safeguards

4 Preparation to work
5 Creasing
6 Corner cutting
7 Punching
8 Technical data
4
1 MutliCREASE 30
MultiCREASE 30 creasing machine is a bindery equipment designed to work in
office conditions, which enables creasing, cutting and punching different types
of materials like paper, plastic or materials covered with plastic (The final result
of windows cutting depends on a type of used material. It is suggested to make
test to evaluate the result.).
2
DESCRIPTION
2
IMPORTANT SAFEGUARDS
3
• Before operating the machine please read the safety precautions, manufacturer recommen-
dations and the operation manual.
• The operation manual should be easily available at any time for the operator.
• The machine should be placed on a stable and durable surface.
• The machine should be protected against dust and moisture.
• The machine contains cutting elements – please pay attention when working with these
elements or nearby.
• Because of the possibility of injury please do not put your fingers under the bar while
putting the arm down.
• The machine should be kept away from children.
• The machine must not be used for any other purposes than those indicated in the operating
manual.
• It is necessary to check and supervise if the machine operates correctly.
• The machine should be operated according to general safety rules. In case of any malfunc-
tions, contacting the servicing point is required.
• Any repairs can be conducted only by authorized staff.
MutliCREASE 30 - User's guide
3
1 - Gauges
2 - Bar
3 - Arm
1
EN
5