Max 60221 Gebrauchsanweisung Seite 26

Place the extension cord over your shoulder
and work the large, even surfaces, such as
the bonnet, boot lid and roof, � rst.
Use regular motions.
Important! Just rest the polisher on the
surface to be polished; it is not necessary to
press!
Continue with the smaller surfaces (e.g.
doors). Let the power cord hang free and
hold the machine as shown in the picture.
For hard-to-access areas, take the buff er pad
off the disc and polish these areas manually
(e.g. wing mirrors, bumpers, door handles,
etc.).
26
Now replace the fabric buff er pad with
the synthetic buff er pad, drawing it over
the polishing disc. Make sure that it is
clean. Remove the polish layer in the same
sequence as the polish was applied.
Warning! Do not expose the polisher to
pressure!