Safety Directions; Service And Maintenance - Max 60221 Gebrauchsanweisung

POLISHER
Introduction
To get the most out of your new polisher,
please read through these instructions
before use. Please also save the instructions
in case you need to refer to them at a later
date.
Important: To avoid hazards and damage
such as � re, surges or injuries, please read
the safety directions below before using the
polisher for the � rst time.

1. Safety directions

· Only use the polisher in a clean and dry
environment.
· The polisher should be resting against
the surface being polished when it is
switched on or off .
· Take appropriate precautions to prevent
children getting hold of the machine.
· Avoid unintentional engagement.
· Do not keep your � nger on the switch
when moving the connected polisher
from one point to another.
· Unplug from the mains when changing
the buff er pad or repairing.
· Never lift or transport the polisher by its
power cord.
· Protect the power cord from strong
heat, oil and sharp edges.
· Always check the power cord for any
breaks before using the machine.
· Only apply heavy pressure (if required)
for short periods during polishing.
· Check housing and switch for damage.
· Do not use the polisher if the housing or
switch is defective.
24

2. Service and maintenance

1. Buff er pads should be hand-washed
only and allowed to air-dry.
2. When not in use, the polisher should
be stored upturned with the buff er pad
removed, to allow the polishing disc to
dry and to ensure it retain its original
shape.
3. Excessive use of wax or paste can result
in the pad coming off the polishing disc
during polishing.
4. Use only mild soap and a damp cloth for
cleaning the buff er pad.
Important: Do not use abrasive polish.
3. Care tips
· For optimum paintwork protection, you
should polish your car 2 to 3 times a
year.
· Wash your car at least every two weeks.
Avoid using household cleaners, as
these can damage the paintwork and
dissolve the top layer.
· Wash your car with a clean sponge.
Work from the top down.
· Remove any insects, bird droppings
and tar specks daily from your car's
paintwork.
· To prevent glass cleaner spraying onto
the paintwork, spray it onto a chamois
and not directly on the window.
,